Planning a kitchen renovation, finishing a basement, or adding a room to your home in Taylors means the electrical side needs to be figured out before the drywall goes up. Getting the circuits right from the start is far less expensive than opening finished walls later. Whether you are a homeowner planning an addition, a landlord preparing a property for a new tenant, or a business owner fitting out a commercial space, we handle the wiring, the panel work, and every circuit in between.
Call (864) 365-3623 to talk through what your project involves and get a price before anything is scheduled.
We work across Taylors and the surrounding area, taking on everything from a single dead outlet to a full panel replacement to new construction wiring. We are available daily from 9:00 AM to 8:30 PM. The scope and the price are settled on the call, so you know what the job covers before anyone shows up.
A finished electrical job is not just one that works when the breaker goes back on. It is one that is documented well enough to be understood by the next person who needs to work on it, whether that is a home inspector, a future electrician, or a tenant asking why a circuit is tripping.
Before we close out any job, we test the circuits involved, confirm that GFCI and AFCI protection is functioning where it is required, and make sure the panel directory reflects what is actually on each breaker. A panel with accurate labeling is a panel that can be worked on safely. When a property changes hands or a new tenant moves in, a clearly documented electrical system is one less thing for anyone to guess at. We give you straight answers about your panel and wiring, and we leave the work in a condition that holds up to inspection.
A plug-in strip handles what is directly connected to it and nothing else. The refrigerator, the HVAC supply circuit, the water heater, and anything else hardwired into the home is unprotected until a whole-home surge device is installed at the panel. The region sees enough thunderstorm activity, and enough utility-side fluctuations, that protecting every circuit from a single point of entry is a practical step rather than an optional one. We install panel-level surge protection as a standalone job or alongside a panel upgrade.
An outlet that works most of the time, a breaker that trips under load but not always, or a light that flickers only when another appliance runs are all symptoms that point somewhere specific once the circuit is traced. Intermittent faults are harder to diagnose than a dead outlet because the problem is not always present when you go looking for it. We work through the circuit methodically, check connections, test breakers, and look at the panel before drawing a conclusion. We get to the bottom of the problem fast.
Low-voltage work, doorbell wiring, structured data cabling, and rough-in for smart home devices all require the same attention to routing and code compliance as standard branch circuit wiring. If a renovation or addition is underway, roughing in the low-voltage alongside the power wiring is the right time to do it. Retrofitting afterward means reopening walls. We handle the low-voltage side as part of a larger project or as a standalone job when the scope calls for it.
A detached garage or workshop that needs more than a single circuit is a candidate for its own subpanel fed from the main panel in the house. A subpanel lets you run multiple circuits to the structure without running individual home-run cables for each one, and it gives the space the capacity to grow. The job involves sizing the feed correctly, running the appropriate conductors, installing the subpanel, and making sure the grounding and bonding at the outbuilding are done to code. We handle the full scope from the main panel to the final connection.
Properties in and around Taylors that rely on a well pump need a dedicated circuit sized for the motor's starting draw, which is considerably higher than its running draw. The same applies to irrigation systems with pump controls. A circuit that is undersized for the starting load will trip the breaker reliably, often at the worst time. We size the circuit correctly for the load, run it from the panel, and make sure the disconnect and protection are in place.
The price depends on what the job involves, and the only way to give you an accurate number is to understand the scope first. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote. A simple outlet replacement is a different conversation from a panel upgrade that also requires a utility coordination for the service entrance.
When you call, we ask about the symptom, the property type, and what has already been checked. From there, the price is confirmed before anything is booked. You can ask what it covers and get a straight answer. There is no reason to guess at what a job will cost before you have talked to anyone.
Call (864) 365-3623 and we will walk through it.
Recessed LED lighting in a kitchen or living area changes how the space reads and how it functions. We install recessed fixtures, replace outdated surface-mounted lights, add switch legs for new fixtures, and wire dimmer controls where the circuit and fixture type support them. If a lighting upgrade is happening alongside a renovation, roughing in the new fixture locations before the ceiling is closed is the right sequence. We confirm the circuit capacity and the box ratings before anything goes in.
Outdoor lighting for driveways, entries, and building perimeters involves weatherproof boxes, correct conduit, and proper grounding. Motion sensor lights, security lighting, and landscape lighting all require circuits that are protected and routed correctly for outdoor exposure. When other exterior work is already underway, adding outdoor lighting at the same time avoids a separate mobilization later. We handle the wiring and the fixture installation together. The wider scope of the work is on the services page covering electrical work.
Getting a call scheduled in Taylors is straightforward. Short-notice and weekend appointments are available based on what the schedule allows. Ask when you call and we will confirm what is open.
When a problem will not keep, urgent electrical faults are handled as a priority. A sparking outlet, a panel that is warm to the touch, or a breaker that will not reset and is feeding an occupied space are not situations to leave until a convenient slot opens up. Call and we'll get you back to full power.
For rental properties and commercial spaces that need to stay occupied or operational, we talk through access and timing on the call before anything is booked. Some jobs can be staged so that only one circuit or area is de-energized at a time. Others require the main to come off for part of the work. Either way, the plan is confirmed before the visit, not worked out at the door.
We take calls from across Taylors and the neighboring communities throughout Greenville County. That includes Wade Hampton, Greer, Sans Souci, City View, and Greenville. Homes in this area were wired in different decades, and it shows in the panels. Whether the property is a newer build or one that has had circuits added and modified over the years, we work with what is there and bring it up to where it needs to be.
If you are not sure whether your address falls within the area we cover, call (864) 365-3623 and we will confirm before anything is scheduled.
We handle residential and commercial work across the region, and the neighboring communities listed here are all covered without qualification.
Older homes in and around Taylors often have panels that were not sized for today's loads, circuits that were added without documentation, and outlet locations that no longer meet current code requirements. Knob-and-tube and aluminum branch circuit wiring show up in properties that have not been updated in a while. We assess what is there and explain what needs attention before any work begins.
Outdoor wiring needs to be rated for wet and UV exposure, run in appropriate conduit where required, and terminated in weatherproof boxes. The specific requirements depend on whether the wiring is exposed, buried, or run under a covered area. We confirm the right approach for the installation when you call.
An empty property is straightforward from a scheduling standpoint, but we need confirmed access before the visit. We work through the access plan when you call, whether that means a lockbox, a key pickup, or someone meeting us at the property. The scope and price are confirmed before the visit regardless.
Yes, and rental properties come with their own set of priorities: GFCI protection where code requires it, panel labeling that a tenant can follow, and wiring that will hold up through an inspection. We work with landlords on individual units and on multi-unit properties.
Call (864) 365-3623 and we will confirm what the visit covers before anything is scheduled.
A record of any electrical work done during a tenancy, including outlet replacements, circuit additions, and panel work, gives the landlord a clear picture of the property's electrical condition going into a new tenancy. An inspection between tenants is also a practical step for identifying anything that needs attention before a new occupant moves in.
That is a common request and one we handle from start to finish. A home addition needs new circuits run from the panel, with load calculations to confirm the existing service can carry the added demand. A garage conversion typically involves adding outlets, a subpanel if the space needs multiple circuits, and lighting. We scope the full electrical side on the call and confirm the price before anything is scheduled.
Call (864) 365-3623 to get a price, ask about scheduling, or talk through what a job involves before you commit to anything.
Short-notice calls are welcome, and scheduling is based on what is currently open. Code-compliant wiring on every job is how we approach the work, and we take pride in the electrical work we leave behind.
Power restored. Code-compliant. Done right.
Browse our map of towns. Electrical work also reaches these towns: Wade Hampton, Sans Souci, Travelers Rest, Judson, Lyman.
We handle the full range of residential and commercial electrical work in Taylors, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope and a confirmed price on the phone before anything is scheduled. The table below covers what each service includes, who it fits best, and what is practical to know before you call.
Call (864) 365-3623 and we will walk through what your job involves.
| Service Type | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Dedicated Appliance Circuits |
| Anyone adding a high-draw appliance that needs its own breaker and circuit | Hot tub and pool hookups carry specific GFCI and disconnect requirements. We size and wire those installations to meet those requirements as part of the job. |
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, a major appliance, or a new addition, or any property with an undersized or aging panel | South Carolina's air conditioning demand puts real load on older panels. A load calculation on the call tells you whether the current service can carry what the property needs before any work is scheduled. |
| Backup Generator Installation |
| Homeowners in Greenville County who want power during storm outages | A transfer switch is required for a safe hookup. It disconnects the home from the utility grid before the generator supplies power, which protects anyone working on the lines during an outage. |
Call (864) 365-3623 to get a price and scope for your job before anything is scheduled. We are open daily from 9:00 AM to 8:30 PM.
(864) 365-3623