When something in your home stops working the way it should, the first question is usually the same: who do I call, and how fast can they get here. We handle electrical repairs, panel upgrades, wiring, lighting, EV charger circuits, backup generator hookups, and surge protection for homes and businesses across Sans Souci and the surrounding parts of Greenville County.
Call (864) 365-3623 for a quote. We are open every day from 9:00 AM to 8:30 PM.
Sans Souci is a town with a lot of residential housing, much of it built across different decades, and the electrical systems reflect that. Homes in this area were wired in different decades, and it shows in the panels. Older properties may be running original wiring that was never designed for today's load, and newer additions do not always connect cleanly to what was already there. We work with all of it, from a single dead outlet to a full service upgrade, and we give you straight answers about your panel and wiring before any work starts.
Getting your power back is easier than you think, but not every job is a clean start. When a repair or upgrade reveals wiring that was done incorrectly, the question is always the same: what can stay and what has to come out. Not all of it has to go. A circuit that was wired with the wrong gauge wire needs to be replaced. A box that was covered over instead of extended needs to be brought back out. A connection that was made with the wrong materials needs to be redone. But a circuit that was run correctly and is still in good shape does not need to be touched just because it is old.
We work through what we find without turning a straightforward repair into a larger project than it needs to be. If something is a code violation or a safety concern, we tell you what it is and what fixing it involves before we do anything. If it is something that can be left alone, we say that too. The scope is confirmed on the call and again on site, so nothing changes without a conversation first.
The price for any electrical job depends on three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. A straightforward outlet replacement is a different conversation from a repair that requires tracing a fault through finished walls or upgrading a panel before a new circuit can be added. Those are not surprises, they are just scope, and the scope is what drives the number.
When you call, we work through what you are dealing with and confirm the price before anything is scheduled. You know what the job covers before anyone shows up. Ask what it includes and you get a plain answer. We do not schedule work and figure out the details later.
A quote can change if the job opens up and reveals something that was not visible from the outside. Wiring that has been modified in ways that are not obvious until the circuit is accessed, a panel that is closer to capacity than it appeared, or a conduit run that has to go a different route than expected are the kinds of things that move a number. When that happens, we stop and talk it through before continuing. Code-compliant wiring on every job means we do not skip the step of confirming scope when the scope changes.
Call (864) 365-3623 to get the process started.
There is no reason to guess at what a job will cost before you have talked to someone.
Whether this is your first repair or your tenth, commercial and light industrial jobs have their own planning requirements. A business that has to stay open cannot have its main panel de-energized during operating hours without a plan for keeping the critical circuits live. A property manager with multiple units needs the work scoped so it does not create a chain reaction across tenants. A workshop or light industrial space may need circuits that are sized and protected differently from standard residential wiring.
We plan commercial jobs around the operation, not the other way around. That means talking through what has to stay live, what the schedule looks like, and whether out-of-hours work is the right call. The electrical side of a commercial build-out or a multi-unit property gets the same attention to load calculations and circuit sizing as a residential panel upgrade. We show up ready to wire and work through the job in the order that keeps the most of the site functional for the longest.
A smoke alarm that is plugged into an outlet or running on a battery alone is not the same as a hardwired unit with a battery backup. Hardwired alarms are interconnected, so when one triggers, they all sound. In a house with multiple floors or a layout where sound does not carry easily, that matters. We run the wiring, install the units, and make sure the interconnect is working before we leave.
A Level 2 EV charger needs a dedicated 240-volt circuit run from the panel to the charger location, sized for the draw of the specific charger being installed. The panel has to have the capacity to carry it. If it does not, that conversation happens before the circuit is run, not after. We handle the load calculation, confirm the panel can carry the added circuit, and run the wiring to code.
A welder or air compressor draws a significant amount of current and needs a dedicated circuit sized for its rated amperage, not shared with anything else in the shop. Running shop equipment on a circuit that was not designed for it causes nuisance tripping and stresses the wiring over time. We size the circuit correctly from the start, which means a proper load calculation and the right wire gauge and breaker for the equipment.
Homes built in certain decades may have aluminum branch circuit wiring, which is not unsafe on its own but becomes a concern at the connection points where aluminum meets devices and fixtures. The remedy is not always a full rewire. In many cases, the right approach is to address the connections with the correct materials and methods, and we confirm which approach applies after we have seen what is there.
A new refrigerator in a garage, a chest freezer, a hot tub, or a large window unit all need circuits that match their draw. A hot tub installation involves a dedicated circuit, a disconnect within sight of the unit, and GFCI protection at the right points. We handle the electrical side of the hookup and make sure the panel has the capacity before the circuit is run.
Recessed lighting changes how a room works and how it looks. We run the wiring, cut the boxes, and install the fixtures, and where a larger lighting load calls for a dedicated circuit, we add one. Exterior lighting, including security lights, motion sensors, and landscape fixtures, requires weatherproof boxes, correct conduit, and proper grounding. We handle interior and exterior lighting as part of the same job when the scope calls for it. What each job covers is written out on our list of electrical services.
Appointments are arranged on the phone. When you call, we ask about the symptom, the property, and what has already been checked, and we confirm the price before anything is put on the calendar. Short-notice and weekend appointments may be possible depending on what the schedule allows, so ask what is open when you phone. We are available every day from 9:00 AM to 8:30 PM.
When a problem will not keep, urgent electrical faults are handled as a priority. A sparking outlet, a panel that is warm to the touch, a burning smell near a breaker, or a section of the house with no power are all situations where waiting is not the right answer.
Call (864) 365-3623 and describe what you are seeing, and we will work through what needs to happen next.
For tenants and businesses that have to stay open, we plan the work around the schedule. That means confirming what will be shut off, for how long, and what arrangements are needed for access. We get to the bottom of the problem fast and work through the job in the order that causes the least disruption.
We cover Sans Souci and the surrounding communities throughout this part of Greenville County. That includes City View, Berea, Parker, Judson, and Dunean. If you are not sure whether your address falls within our range, call and we will confirm before anything is scheduled.
The work is the same across the area: repairs and fault finding, panel upgrades and service work, outlet and switch installation, lighting, wiring, EV charger circuits, backup generator hookups, and whole-home surge protection. Residential and commercial, older properties and newer ones, we handle the full range of electrical work this part of the county calls for.
Permit requirements depend on the scope of the work and, in some cases, whether the job touches the service entrance or involves new circuits rather than repairs. We confirm what applies at your address before anything is scheduled, so permitting does not become a surprise partway through the job. Ask about it when you call and we will walk through what the job involves and what that means for the timeline.
Pool pumps, underwater lighting, and any powered equipment at a pond or water feature need circuits with GFCI protection and weatherproof enclosures. Bonding of the pool structure and equipment is a separate requirement that protects against shock in and around the water. We handle the circuit work, the bonding, and the weatherproof wiring from the panel to the equipment location.
Wiring that cannot be accessed without opening the wall is assessed from both ends, at the panel and at the device or fixture it feeds. If the wiring needs to be replaced and the wall must be opened, we confirm the access points and the extent of the opening before the work starts. In some situations, surface raceway or a new run is the more practical option.
The duration depends on the scope of the panel work. A breaker replacement may require only a brief shutdown of the affected circuit. A full panel replacement or service upgrade requires the main power to be off for the duration of the installation, which can run several hours. We give you a realistic estimate of the shutdown window when the job is scoped.
Older residential properties in this part of Greenville County tend to have panels that were sized for a lighter electrical load than modern households draw, wiring that has been modified over the years without always being documented, and outlets that predate GFCI requirements. Those three things come up often enough that we ask about them on the call before we arrive, so we arrive with the right picture of what we are walking into.
Every job we take on in Sans Souci gets finished to the same standard: code-compliant wiring, the fault resolved, and the site left the way we found it. We take pride in the electrical work we leave behind, and that applies to a single outlet repair the same as it does to a full panel replacement. Power restored. Code-compliant. Done right.
Call (864) 365-3623 to get a quote or ask about scheduling. We are open every day from 9:00 AM to 8:30 PM.
Check our map of towns. Wiring and panel work covers these nearby towns as well: Berea, Parker, Judson, Travelers Rest.
We handle the full range of residential and commercial electrical work in Sans Souci, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope and a confirmed price on the phone before anything is scheduled. The table below covers what each service includes, who it fits best, and what is practical to know before you call.
Call (864) 365-3623 and we will walk through what your job involves.
| Service Type | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Dedicated Appliance Circuits |
| Anyone adding a high-draw appliance that needs its own breaker and circuit | Hot tub and pool hookups carry specific GFCI and disconnect requirements. We size and wire those installations to meet those requirements as part of the job. |
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, a major appliance, or a new addition, or any property with an undersized or aging panel | South Carolina's air conditioning demand puts real load on older panels. A load calculation on the call tells you whether the current service can carry what the property needs before any work is scheduled. |
| Ceiling Fan Installation |
| Any room where a fan is being added or an old unit replaced | Older ceiling boxes are often not rated for a fan's weight and movement. We confirm the box is correct before mounting so the installation holds properly. |
Call (864) 365-3623 to get a price and scope for your job before anything is scheduled. We are open daily from 9:00 AM to 8:30 PM.
(864) 365-3623