When something goes wrong with the power in your home, the first question is usually whether the fix is straightforward or whether it points to something bigger. That question deserves a straight answer before any work is scheduled. We handle residential and commercial electrical work throughout Welcome and the surrounding area, from a single dead outlet to a full panel replacement and everything in between.
Call (864) 365-3623 for a quote.
Welcome is a town with a mix of housing ages and property types, and the electrical work reflects that. Older homes on original wiring, outbuildings, added circuits that were never properly documented, and properties that have changed hands a few times without a full electrical review are all common here. We work with homeowners, rental property owners, and small businesses, and we scope each job on the call before anything is put on the calendar.
Somebody tells you the job is a full rewire, or a complete panel replacement, or that the whole circuit needs to come out. Maybe that is exactly right. Maybe the problem is narrower than it sounds, and a targeted repair handles it. Before you commit to a large job, it is worth talking through what the symptoms actually are and what the diagnosis is based on.
We scope jobs over the phone. You describe what is happening, and we ask the questions that help narrow down what is actually going on. We handle the full range of electrical work, so if the job does turn out to be significant, we handle that too. The point is that you should know what you are agreeing to before anyone starts pulling wire. Decisions about the work get made while you are on the phone.
The price on a job depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing wiring and panel can carry whatever change is being made. A straightforward outlet replacement is a different conversation from a partial rewire or a service upgrade. We confirm the price before we schedule anything, so there are no gaps between what you agreed to and what shows up on the bill.
A few things can shift the scope once the work is underway. Hidden wiring that runs through finished walls or a crawl space takes more time to trace than wiring in an open basement. An older home may have aluminum branch circuit wiring or knob-and-tube that turns up during a repair and needs to be addressed as part of the job. If anything changes the scope, we talk through it before continuing. You get straight answers about your panel and wiring, and the price reflects what the job actually involves.
To get a quote, call (864) 365-3623. We confirm the rate on the phone before anything is scheduled.
An outlet that has never worked since you moved in. A switch that sparks when you flip it. An outside light that has been on the list for two years. These feel like small things, and they are easy to leave for later. The problem is that a switch that sparks is not just an annoyance. It is a sign of a loose connection or a failing device, and a loose connection in a wall can generate heat over time. An outdoor fixture that has been wired incorrectly or has a deteriorating box is a moisture and shock risk, not just a lighting gap.
The outlet that never worked may be on a dead circuit, a tripped GFCI elsewhere in the house, or a wiring fault. It takes a few minutes to find out which. None of these are jobs that require a major disruption to the house. They are calls worth making rather than items to keep moving down the list. We'll get your lights back on fast.
Some electrical problems will not keep. A sparking panel, an outlet that is warm to the touch, a burning smell near a breaker box, or a section of the house that has gone dark without explanation are all situations where waiting for a convenient slot is not the right answer. We take urgent calls and handle them as a priority. We are available daily from 9:00 AM to 8:30 PM.
A rental property with a tenant in it, or a small business that has to keep running during the day, needs a visit that works around the people using the space. We confirm what access is needed and when the work can happen before the appointment is set. If a circuit needs to be de-energized, we let you know in advance so the tenant or the business can plan around it. The scope and the timing are both settled on the call.
Older homes in this area were not designed with today's electrical loads in mind. Adding a Level 2 EV charger, a new range, a dryer in a location that never had one, or a central air supply circuit to a panel that was sized for a much lighter load is not always a straightforward installation. The panel may not have the capacity. The existing wiring may not be rated for the new draw. The circuit may not exist at all.
We work out what the property can carry before any new circuit is run. That starts with a load calculation to see what the panel is already feeding and how much headroom is left. If the panel is undersized, a service upgrade to a higher amperage is the answer before anything else is added. If the circuit just needs to be run from an existing panel with room, that is a simpler job. Either way, we confirm what the scope involves on the call so you know what you are looking at before anyone shows up. Code-compliant wiring on every job is how we approach all of it. How a job in Welcome usually runs is walked through on our services page.
Sometimes the problem is on our side of the meter and sometimes it belongs to the utility. Working out which is which matters before any repair is started. A tripped main breaker, a failed breaker in the panel, or a wiring fault between the panel and a circuit all sit on the property side and are ours to fix. A fault in the service entrance, the meter base, or the line coming in from the street belongs to the utility.
We check the panel, the service entrance, and the visible wiring to determine where the fault sits. If it turns out to be on the utility's side, we let you know what that means and what the next step is, including how to contact the utility and what to tell them. We get to the bottom of the problem fast.
A plug-in strip covers what is plugged into it and nothing else. The refrigerator, the supply circuit for the HVAC equipment, the EV charger circuit, and every other hardwired load in the house are all unprotected without a panel-level device. Whole-home surge protection installs at the main panel and covers every circuit from a single point. Given the frequency of thunderstorms and lightning activity across this region, it is a practical step for any property here.
A dead outlet, a switch that no longer works, a dimmer that buzzes, or a kitchen that needs GFCI protection added are all straightforward calls. We replace devices, add GFCI and AFCI protection where it is required, and install new outlets and switches wherever the layout calls for them. If the wiring behind the device is part of the problem, we address that as part of the job rather than just swapping the face.
Properties with a well pump or an irrigation system need a dedicated circuit sized for the motor load. A shared circuit that also feeds other loads is not the right answer for a pump. We run the dedicated circuit, confirm the breaker is correctly sized, and make sure the wiring is rated for the draw. For irrigation systems, the supply circuit and any outdoor wiring get the weatherproof boxes and conduit the installation calls for.
A 100-amp service that was standard in older construction is often not enough for a property running modern loads. A service upgrade to 200 amps gives the panel the capacity to carry an EV charger circuit, a range circuit, central air supply wiring, and the rest of the home's load without constantly pushing the limits of what the panel can handle. The upgrade involves a load calculation, coordination with the utility for the service connection, and installation of the new panel and breakers.
A stairwell light that should be controllable from both the top and bottom of the stairs, a hallway switch that needs to work from either end, or a room where the switching was never set up correctly are all three-way switch situations. The wiring for a three-way circuit is different from a standard single-pole switch, and adding a location to an existing circuit requires running the right wire. We handle the wiring and the device installation together.
A range or wall oven needs a 240-volt dedicated circuit sized for the appliance's draw. A dryer is the same. If the circuit does not exist, we run it from the panel. If the panel does not have the capacity, that gets addressed first. Moving a range or dryer to a new location in the kitchen or laundry room means running the circuit to the new location, not just extending an existing one. We confirm the scope on the call.
We serve Welcome and take calls from across the surrounding communities, including Parker, Dunean, Powdersville, Judson, and City View. The full scope of Greenville County is covered.
If you are not sure whether your address falls within our range, call (864) 365-3623 and we will confirm before anything is scheduled.
Homes in this area were built across several decades, and some still have knob-and-tube or aluminum branch circuit wiring that was not updated when the property changed hands. Both types carry real safety concerns when they age or when modern loads are added to them. A call is the right first step to understand what the wiring situation actually is and what, if anything, needs to be done about it.
A shared supply means that work affecting the main service or the building panel may impact other units. We coordinate with the building manager before any work that could affect shared circuits, and we confirm the scope of the shutdown before anything is scheduled.
Permit requirements depend on the type of work and whether it involves the panel, new circuits, or changes to the service entrance. We confirm what applies to your specific job before the work is scheduled. You do not need to research the requirements yourself before calling.
Electrical work sometimes requires opening walls to run new wiring, and we focus on keeping those openings as small as the job allows. Patching and finishing the wall surface is typically a separate trade, and we will let you know on the call what to expect in terms of access points for the specific job.
Underground wiring to an outbuilding is the standard approach and the one that holds up over time. The depth and conduit requirements depend on the wiring method used. Overhead runs are an option in some situations, but they have their own requirements for height and attachment. We confirm the right approach for the specific property when you call.
That depends on what the panel is currently feeding and how much capacity is left. A load calculation works out what the existing circuits are drawing and whether the panel has room for the new load. If it does not, a service upgrade is the path forward. We work through that on the call so you know the answer before any work is scheduled.
We are available daily from 9:00 AM to 8:30 PM.
Call (864) 365-3623 to get a price, ask about scheduling, or talk through what a job involves before you commit to anything.
Every job is approached the same way: the scope is confirmed before the work starts, the work is done to the standard the code inspectors here enforce, and we take pride in the electrical work we leave behind.
Schedule it. We wire it. You're powered.
Call (864) 365-3623 and we will take care of the rest from there.
You can browse our map of towns. Other towns where we take electrical work: Parker, Dunean, Powdersville, Easley.
We handle the full range of residential and commercial electrical work in Welcome, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope and a confirmed price on the phone before anything is scheduled. The table below covers what each service includes, who it fits best, and what is practical to know before you call.
Call (864) 365-3623 and we will walk through what your job involves.
| Service Type | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, a major appliance, or a new addition, or any property with an undersized or aging panel | South Carolina's air conditioning demand puts real load on older panels. A load calculation on the call tells you whether the current service can carry what the property needs before any work is scheduled. |
| Electrical Repairs & Troubleshooting |
| Any home or business with an unexplained electrical symptom | A burning smell, sparking outlet, or section of the house with no power warrants a call the same day. Most faults trace to a specific point once the circuit is opened. |
| Lighting Installation |
| Homeowners remodeling, improving security lighting, or replacing outdated fixtures | Outdoor circuits require weatherproof boxes, correct conduit, and proper grounding. We run a dedicated circuit where the lighting load calls for one. |
Call (864) 365-3623 to get a price and scope for your job before anything is scheduled. We are open daily from 9:00 AM to 8:30 PM.
(864) 365-3623